Dell Inspiron 7000 Manuel d'utilisateur

Dell™Inspiron™7000 Specifications Jumpers, Switches, Controls, and Indicators Tech Notes Documentation Graphics Initial release: 26 Aug 1998 Last

ComponentLocations(BackView):Dell™Inspiron™7000

TouchPad:Dell™Inspiron™7000 Using the Touch Pad | Installing the Touch Pad/Mouse Driver Using the Touch Pad The PS/2-compatible touch pad detect

ThermalShieldandInternalModemRemoval:Dell™Inspiron™7000 The thermal shield serves as a heat shield for the system board, as well as an EMI fen

Video:Dell™Inspiron™7000 Text Modes | Graphics Modes Text Modes Graphics Modes Resolution; ColorsRefresh Rate (Hz)360 x 400; 1670720 x 400; 16707

1600 x 1200; 64,000 (external monitor)851600 x 1200; 16 million (external monitor with 8-MB video memory option)85NOTES: If you are using an external

ZIFConnectors:Dell™Inspiron™7000 Some of the computer’s interface connectors are ZIF connectors. These connectors are not removable; they must be

Base Assembly Component Removal:Dell™Inspiron™7000 Base Assembly | Base Assembly Component Removal Base Assembly Base Assembly Component Removal T

BatteryChargeGauge:Dell™Inspiron™7000  

RemovingandInstallingaBattery:Dell™Inspiron™7000 

FrontBezelRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the display assembly from the computer base. To remove the fro

DC-DCBoardRemoval:Dell™Inspiron™7000 To remove the DC-DC board, gently pull the DC-DC board off of connectors JP11 and JP16 on the system board.

DisplayAssemblyandDisplayAssemblyComponentRemoval:Dell™Inspiron™7000 Display Assembly Removal | Display Assembly Component Removal Display As

Back to Contents Page Documentation:Dell™Inspiron™7000 Printed Documentation | Online Documentation Printed Documentation To save PDF files (files

ReinstallingUtilitiesandDrivers:Dell™Inspiron™7000 To reinstall utilities and drivers on a computer running the Microsoft® Windows® 98 operating

14. When prompted, click Finish. The New hardware found window appears, the driver is installed, and the installation is completed. Reinstalling Int

13.3-InchLCDBracketsandCarrierTrayRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the front bezel and the 13.3-inch

2. Click Troubleshoot Your Dell System, and then locate the link to the Inspiron page. 3. Select 7000. 4. Click Technical Information, and then clic

Reinstalling Utilities and Drivers for Microsoft®Windows®98:Dell™Inspiron™7000 Overview | Reinstalling Video Drivers | Reinstalling Touch Pad Dri

2. Insert the Dell Inspiron 7000 System Software CD into the CD-ROM or DVD-ROM drive. 3. If the Welcome to Windows 98 screen appears, click the x in

10. At the Setup Complete screen, be sure that the Yes , I want to restart my computer now radio button is selected, and then click Finish. The first

Reinstalling Utilities and Drivers for Microsoft®Windows NT®: Dell™Inspiron™7000 Overview | Reinstalling Video Drivers | Reinstalling Touch Pad Dri

13. Click OK at the dialog box regarding sensitive information. 14. After the appropriate files are copied onto the hard-disk drive and the emergency

UsinganExternalMonitor:Dell™Inspiron™7000 Use the 15-pin monitor connector to attach an external monitor to the computer. If you reconfigure you

Exploded View of 13.3-InchDisplayAssembly:Dell™Inspiron™7000

Exploded View of 14.1-InchDisplayAssembly:Dell™Inspiron™7000

Exploded View of 15-InchDisplayAssembly:Dell™Inspiron™7000

13.3-InchLCDPanelRemoval:Dell™Inspiron™7000  This procedure assumes that you have removed the front bezel. Follow these steps to remove the 13

ExplodedViewofBaseAssembly:Dell™Inspiron™7000

ExplodedViewofComputer:Dell™Inspiron™7000

ExplodedViewofPalmrestAssembly:Dell™Inspiron™7000

UsinganExternalKeyboard,Keypad,orMouse:Dell™Inspiron™7000 You can connect a keyboard with a standard connector to the PS/2 connector on the c

ComponentLocations(FrontView):Dell™Inspiron™7000

GeneralDisassembly:Dell™Inspiron™7000 General disassembly procedures assume that following components have been removed: l AC adapter l Port rep

Graphics:Dell™Inspiron™™ 7000 Status Display Component Locations (Front View) Component Locations (Back View) AC Adapter Removing and Installing a B

Hard-DiskDriveDisassembly:Dell™Inspiron™7000 The hard-disk drive resides in a carrier that mounts in the hard-disk drive compartment in the bott

Hard-DiskDriveHeatShieldRemoval:Dell™Inspiron™7000  This procedure assumes that you have removed the palmrest assembly from the base assembly

HeatExchanger/FanRemoval:Dell™Inspiron™7000 To remove the heat exchanger/fan, follow these steps: 1. Remove the (2) 5-mm screws securing the he

14.1-InchLCDPanel,Brackets,andCarrierTrayRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the front bezel. Follow th

HingeSaddleRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the PC Card heat sink and LVDS board. To remove the hinge sad

I/OConnectors:Dell™Inspiron™7000

I/O:Dell™Inspiron™7000 Infrared Port | Modem Port | USB Connector | Serial Connector | Parallel Connector | Monitor Connector | PS/2 Connector | S-

Parallel Connector Use the 25-hole parallel connector to attach a parallel device to the computer. The parallel connector is used primarily for print

Monitor Connector Use the 15-pin monitor connector to attach an external monitor to the replicator. If the image does not appear on the monitor immedi

S-Video TV-Out Connector If the television has an S-video cable, plug it directly into the system at the S-video TV-out connector. If the television h

IRBoardRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the palmrest assembly from the base assembly. To remove the IR bo

30°ConeofInfraredLight:Dell™Inspiron™7000  

Jumpers,Switches,Controls,andIndicators:Dell™Inspiron™7000 Jumpers | Switches | Controls and Indicators Jumpers There are no jumpers on this

The battery charge gauge on the rear of the main and secondary batteries has 5 charge-level indicator lights that indicate how much battery charge re

15-inchLCDPanelRemoval:Dell™Inspiron™7000 To remove the 15-inch LCD panel, perform the following steps: 1. Turn the computer over and remove t

KeyboardRemoval:Dell™Inspiron™7000 To remove the keyboard, follow these steps: 1. Turn the computer over and remove the (4) 20-mm screws from th

EmbeddedNumericKeypad:Dell™Inspiron™7000 

LatchAssemblyRemoval:Dell™Inspiron™7000 To remove the latch assembly, follow these steps: 1. Disconnect the LED cable from connector JP2 on the

LVDSBoardRemoval:Dell™Inspiron™7000  To remove the LVDS board, follow these steps: 1. Remove the 4-mm screw securing the LVDS board. 2. Gentl

SystemBoardRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the PC Card heat sink, LVDS board, and hinge saddles. To remo

Memory:Dell™Inspiron™7000 Memory Installation Guidelines | Valid Memory Configurations | Removing and Installing Memory | Upper Memory Map | Conven

1. Save any open files. 2. Shut down your computer and peripherals and unplug them from the electrical outlets. 3. Remove any installed batteries.

660000h–6FFFFhUser memory770000h–7FFFFhUser memory880000h–8FFFFhUser memory990000h–9FBFFhUser memory9FC00h–9FFFFh PS/2 mouse-data area

ComboModuleDisassembly:Dell™Inspiron™7000 The combo module contains either a CD-ROM drive or a DVD-ROM drive on top of a floppy diskette drive. T

TechNotes:Dell™Inspiron™7000 Video I/O Memory Power Sources Storage Devices Touch Pad Audio Devices PC Cards Using the Embedded Numeric Key

ACAdapter:Dell™Inspiron™7000  

UsingtheEmbeddedNumericKeypad:Dell™Inspiron™7000 As you work, you may want to use the embedded numeric keypad to enter numbers into a spreadshe

PalmrestAssemblyandPalmrestAssemblyComponentRemoval:Dell™Inspiron™7000 MPEG-2 Card Removal | Palmrest Assembly Removal | Palmrest Assembly Co

3. Remove the (2) 4-mm screws from the top inside of the battery bay. 4. Remove the (2) 4-mm screws from the top inside of the hard-disk drive bay.

PasswordsandSecurity:Dell™Inspiron™7000 About Passwords | Physically Securing the Computer | Disabling the Serial and Parallel Ports About Passw

PCCardCageRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the system board from the plastic case. To remove the PC Card

PCCards:Dell™Inspiron™7000 PC Card Slots | Installing a PC Card | Removing a PC Card | Configuring a PC Card PC Card Slots The computer has 2 slot

PCCardSlots:Dell™Inspiron™7000   

PCCardHeatSinkRemoval:Dell™Inspiron™7000 To remove the PC Card heat sink, follow these steps: 1. Remove the (2) 4-mm screws securing the PC Ca

PowerSources:Dell™Inspiron™7000 AC Adapter | Battery | Removing and Installing the Main Battery | Removing and Installing a Secondary Battery | Ch

The AC adapter needs from 2 to 2.5 hours (depending on whether the system is on or off) to fully charge a battery that has been completely discharged.

AudioJacks:Dell™Inspiron™7000  

PowerConservation:Dell™Inspiron™7000 How to Conserve Battery Power | Using Microsoft Windows 98 to Conserve Battery Power | Experimenting with Pow

Standby turns off the display, stops the hard-disk drive, and turns off other internal devices so that the computer uses less battery power. When the

7. Follow the instructions on your screen to create the save-to-disk suspend file. To check the size of the save-to-disk suspend file, type phdisk /i

ProcessorBoardandMemoryModuleRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the heat exchanger/fan. To remove the pr

RemovingtheMemoryModule:Dell™Inspiron™7000  

RemovingtheMemoryModuleCover:Dell™Inspiron™7000

RemovingandReplacingParts:Dell™Inspiron™7000 Precautionary Measures | Service Procedures | Recommended Tools Precautionary Measures Precautionar

6. Remove PC Cards. To remove PC Cards from the top connector, press the top eject button. When the button slides out, press it again to release the

To replace a cover, place it over the opening, leaving a small gap along the rounded edge, and then slide the cover toward the outside of the compute

ZIF Connectors Exploded View of Computer Exploded View of 13.3-Inch Display Assembly Exploded View of 14.1-Inch Display Assembly Exploded View of 15-I

AudioDevices:Dell™Inspiron™7000 You can connect speakers, a microphone, headphones, and record/playback devices such as cassette players, CD playe

Removing the Hard-DiskDrive:Dell™Inspiron™7000  

RJ-11CardRemoval:Dell™Inspiron™7000 To remove the RJ-11 card, follow these steps: 1. Remove the 4-mm screw securing the RJ-11 card to the syste

RemovingDevicesFromtheMediaBay:Dell™Inspiron™7000 

ScrewIdentificationandTightening:Dell™Inspiron™7000 Where applicable, information about screw lengths is provided in illustrations. A complete s

SecurityCableSlot:Dell™Inspiron™7000   

SetupProgram:Dell™Inspiron™7000 Using the Setup Program | Main Menu | System Devices Menu | Security Menu | Power Menu | Boot Menu | Exit Menu Us

Security Menu Power Menu Boot Menu Exit Menu NOTICE: The password features provide a high level of security for the data in the computer. Howeve

SpeakerRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the palmrest assembly from the base assembly and that you have rem

Specifications:Dell™Inspiron™7000 Microprocessor | Chip Set and Bus | PC Card | Memory | Connectors | Audio | Video | 14.1-Inch Display | 15-Inch D

AudioCardandAudioThermalShieldRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the system board from the plastic case

Connectors Audio Video 14.1-Inch Display Serial (DTE)(1) 9-pin connector; 16550-compatible, 16-byte bufferParallel(1) 25-hole connector; normal (un

15-Inch Display Keyboard Touch Pad Battery Weight*3.8 kg (8.37 lb)Maximum resolution 1024 x 768 pixels; 4 billion colors as supported by application

AC Adapter Environmental Depth 148.2 mm (5.83 inches) Width 116.2 mm (4.58 inches)Weight*0.66 kg (1.45 lb)Voltage14.8 VDC Capacity 74 WH Charge time

Regulatory shipmentMaximum shock:*Operating 1.52 m/sec (4.98 ft/sec) (less than or equal to a pulse width of 2 ms)Storage 2.03 m/sec (6.66 ft/sec) (

StatusDisplay:Dell™Inspiron™7000 on top of computer, above keyboard: on front of computer, beneath display latch:

StatusDisplay:Dell™Inspiron™7000 These status lights are above the keyboard: These status lights are on the front of the computer, beneath the di

StorageDevices:Dell™Inspiron™7000 Removing and Installing a Device in the Media Bay Installing and Removing Devices Using Softex BayManager | Hard

6. Slide the new drive into place. There may be some resistance as the drive connects to its interface connector at the back of the bay. 7. Tighten t

TouchPadAssemblyRemoval:Dell™Inspiron™7000 This procedure assumes that you have removed the palmrest assembly from the base assembly and that y

TouchPad:Dell™Inspiron™7000  