Dell OpenManage Server Administrator Managed Node for Fluid Cache for DAS Manuel d'utilisateur Page 280

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 390
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 279
280 Moving Physical and Virtual Disks from One System to Another
5
This reads the data on the physical disks to restore the RAID controller’s
proprietary configuration information. Press Esc and save the new
configuration when prompted.
6
Press the
Esc
key and save the new configuration when prompted.
7
Reboot the system.
Migrating SAS Virtual Disks to Another System
The following describes how to migrate virtual disks and volumes from one
system to another.
1
Turn off the system that the physical disks are being moved from.
2
If the receiving controller does not have a preexisting virtual disk
configuration, then turn off its server.
3
Place the physical disks into the new enclosure.
4
Start up the system connected to the receiving controller.
5
Use the Foreign Configuration Operations task to import the migrated
virtual disks on the receiving controller.
NOTE: The Foreign Configuration Operations are not supported on PERC
S100, S110, and S300 controllers.
The migration is complete. The virtual disk is now manageable through
Storage Management.
Vue de la page 279
1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 389 390

Commentaires sur ces manuels

Pas de commentaire