Management ACL Commands 85
Management ACL Commands
deny (management)
Use the
deny
command in Management Access-List Configuration mode to set conditions for the
management access list.
Syntax
deny
[
ethernet
interface-number
|
vlan
vlan-id
|
port-channel
number
] [
service
service
]
[
priority
priority
]
deny
ip-source
ip-address
[
mask
mask
|
prefix-length
] [
ethernet
interface-number
|
vlan
vlan-
id
|
port-channel
number
] [
service
service
] [
priority
priority
]
•
ethernet
interface-number
—A valid Ethernet-routed port number.
•
vlan
vlan-id
—A valid VLAN number.
•
port-channel
number
—A valid routed port-channel number.
•
ip-address
—Source IP address.
•
mask
mask
—Specifies the network mask of the source IP address.
•
mask
prefix-length
—Specifies the number of bits that comprise the source IP address
prefix. The prefix length must be preceded by a forward slash (/). (Range: 0-32)
•
service
service
—Indicates service type. Can be one of the following: telnet, ssh, http,
https or snmp.
•priority
priority
—Priority for the rule. (Range: 1 - 64)
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
Commentaires sur ces manuels