Dell PowerEdge SC1420 Manuel d'utilisateur télécharger pdf (Page 3)



Installing the Bezel



1. Align the seven bezel release tabs with the system.



2. Press the bezel onto the system until it snaps into place.



3. Install all the drives that you removed.



4. Close the system.



5. Reconnect the system to the electrical outlet, and turn on the system.

Control Panel

You must remove the bezel to access the control panel.



Removing the Control Panel



1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.



2. Open the system.



3. Remove the bezel. See "Removing the Bezel."



4. Disconnect the control panel cable from the I/O panel. See Figure1-3.



5. Using a #2 Phillips screwdriver, remove the screw that secures the control panel to the front panel. See Figure1-2.

Figure 1-2. Removing and Installing the Control Panel

CAUTION: See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Dell PowerEdge SC1420 Manuel d'utilisateur Page 3