Dell PowerVault 220S (SCSI) Manuel d'utilisateur télécharger pdf (Page 9)

Updating the Enclosure Management Module Firmware 9

FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm

DELL CONFIDENTIAL – PRELIMINARY 10/26/04 – FOR PROOF ONLY

Type the following script command in the command line:

sh ./PV220s-221s-FRMW-Rxxxxx.bin -q

where

-q

forces the command to run without user intervention.

Press <Enter> to update the firmware.

When the update completes, a message appears indicating that the update was successful.

Restart I/O activity to the storage system.

Updating Firmware Using Firmware Update Utililties

Dell provides firmware updates as downloadable compressed files that extract the necessary update

and utility files you need to update your firmware. You must use a manual update procedure when

an Array Manager or DUP procedure is not available. Update utilities are available for the following

Dell-supported operating systems:

• Windows Server 2003, Enterprise Edition (64-bit)

• Red Hat Enterprise Linux (Version 3) for Intel Itanium (64-bit)

• Red Hat Enterprise Linux (Version 3) for Intel Extended Memory 64 Technology (EM64T)

• Red Hat Linux 7.

, 8.

, and 9

Windows Server 2003, Enterprise Edition Update Procedure

Use the following procedure to update the firmware on a PowerVault 22

S storage system that is

attached to a host system running the Windows Server 2003, Enterprise Edition (64-bit) operating

system.

Stop all I/O activity to the storage system.

Create a directory on your local file system.

Download the self-extracting

pv2xxA

.exe

firmware update file from

support.dell.com

and

copy it into the directory that you created in step 3.

Extract the files to the directory.

Included in the extracted files are the executable

.exe

utility file for the firmware update and

the firmware image file.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Dell PowerVault 220S (SCSI) Manuel d'utilisateur Page 9