Dell UPS 10000R Manuel d'utilisateur télécharger pdf (Page 10)

Installation and Startup

NOTE:

The battery retaining brackets are labeled L (Left) and R (Right) to indicate where they must be installed.

Remove both retaining brackets from the UPS:

Locate the left (labeled L) retaining bracket. On the left side of the chassis, turn the thumbscrew

counter-clockwise to release the left retaining bracket.

Push the bracket toward the center post to disengage it from the chassis. Swing the bracket toward

you and pull the bracket to the left to remove it. Set the bracket aside.

Locate the right (labeled R) retaining bracket. On the right side of the chassis, turn the

thumbscrew counter-clockwise to release the right retaining bracket.

Push the bracket toward the center post to disengage it from the chassis. Swing the bracket toward

you and pull the bracket to the right to remove it. Set the bracket aside.

Ensure all battery connectors are disconnected.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 243 244

Pas de commentaire

Dell UPS 10000R Manuel d'utilisateur Page 10