Dell Dimension 4550 Manuel d'utilisateur télécharger pdf (Page 93)

Adding Parts 93

Adding a Memory Module

1 Press out the securing clip at each end of the memory module

connector.

2 Align the notch on the bottom of the module with the crossbars in the

connector.

NOTICE: To avoid damage to the memory module, press the module straight

down into the socket with equal force applied at each end of the module.

Insert the module straight down into the connector, ensuring that it

fits into the vertical guides at each end of the connector. Press firmly

on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the

cutouts at each end of the module.

4 Close the computer cover (see page 104).

securing clips (2)

notch

step 1

memory module

cutouts (2)

connector

step 2

step 3

memory module connectors

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 151 152

Pas de commentaire

Dell Dimension 4550 Manuel d'utilisateur Page 93