Dell PowerEdge C5230 Manuel d'utilisateur télécharger pdf (Page 11)

Using the System Setup Program 11

Using the System Setup Program

Start Menu

The system employs the latest AMI Core BIOS, which is stored in Flash

memory. The Flash memory supports the plug-and-play specification, and

contains a BIOS Setup program, the Power On Self Test (POST) routine, and

the PCI auto-configuration utility.

This system board supports system BIOS shadowing enabling the BIOS to

execute from 64-bit onboard write-protected DRAM.

Use the Setup Utility to configure items such as:

• Hard drives and peripherals

• Memory sizing and configuration

• Password protection from unauthorized use

• Protocol and feature enabling/disabling

• Power Management features

This Setup utility should be executed under the following conditions:

• When changing the system configuration

• When a configuration error is detected by the system and you are

prompted to make changes to the Setup utility

• When redefining the communication ports to prevent any conflicts

• When changing the password or making other changes to the security

setup

NOTE: Only items in brackets [ ] can be modified. Items that are not in brackets are

display only.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 145 146

Pas de commentaire

Dell PowerEdge C5230 Manuel d'utilisateur Page 11