Dell XPS 710 Manuel d'utilisateur télécharger pdf (Page 43)

Removing and Installing Parts: Dell XPS 700 Service Manual

parts.htm[4/11/2014 11:32:11 AM]

7. Connect the power cable to the hard drive.

8. Connect the hard drive data cable to the hard drive.

1 power cable 2 data cable

9. Replace the computer cover (see Replacing the Computer Cover

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

10. Connect the computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

Drive Panel

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

Removing the Drive Panel

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Grasp the drive release latch and slide it towards the base of the computer until the drive panel snaps open.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Pas de commentaire

Dell XPS 710 Manuel d'utilisateur Page 43