Dell XPS/Dimension XPS Gen 4 Manuel d'utilisateur télécharger pdf (Page 35)



4. Attach the power and data cables to the floppy drive.



5. Connect the other end of the data cable to the connector labeled "FLOPPY" on the system board.



6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.



7. Close the computer cover.



8. Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.



9. Enter the system setup program and update the appropriate Diskette Drive option.



10. Verify that your computer works correctly by running the Dell Diagnostics.

CD/DVD Drive



Removing a CD/DVD Drive



1. Follow the procedures in "Before You Begin."



2. Disconnect the power and data cables from the back of the drive.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 52 53

Pas de commentaire

Dell XPS/Dimension XPS Gen 4 Manuel d'utilisateur Page 35