Dell 14 Manuel du propriétaire télécharger pdf (Page 59)

Replacing the Status-Light

Board

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw hole on the status-light board with the screw hole on the

palm rest.

2 Replace the screw that secures the status-light board to the palm rest.

3 Using the alignment posts, place the left speaker on the palm rest.

4 Adhere the status-light board cable to the palm rest and slide the cable

through the slot on the palm rest.

5 Turn the computer over and open the display.

6 Slide the status-light board cable in the connector and press down on

the latch to secure the cable.

Post-requisites

1 Replace the I/O board.

2 Replace the base frame.

3 Replace the keyboard.

4 Replace the fan.

5 Replace the hard drive.

6 Replace the battery.

7 Replace the base cover.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 78 79

Pas de commentaire

Dell 14 Manuel du propriétaire Page 59