Dell Inspiron 2650 Manuel d'utilisateur télécharger pdf (Page 17)



Removing the Display Bezel

1. Remove the keyboard.

2. Remove the display assembly.

3. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel.

4. Remove the five M2.5 x 5-mm screws located on the front of the bezel.

5. Startingatthebottomofthedisplaypanel(bytheDell™logo),useyourfingerstoseparatethebezelfromthetopcoverbyliftingtheinsideofthe

bezel while pushing in on the outside.

Removing the 14-Inch Display Panel

1. Remove the keyboard.

screw covers (5)

M2 x 3-mm screws (4)

M2.5 x 5-mm screws (5)

M2.5 x 5-mm screw (1)

display bezel

display-feed flex cable

display panel

flex-cable retention bracket

M2.5 x 5-mm screws (2)

top cover

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 86 87

Commentaires sur ces manuels

Pas de commentaire

Dell Inspiron 2650 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Carnets de notes Dell Inspiron 2650