Dell Inspiron 3000 Manuel d'utilisateur télécharger pdf (Page 100)

4-64 Dell Inspiron 3000 Series Service Manual

4. Separate the front bezel from the back cover.

With the bottom of the LCD assembly facing you (cables end), insert your

fingertips between the LCD panel and the front bezel. Start in the center of

the bezel and work out to the corners. With a peel-back-and-push motion,

separate the front bezel from the hidden tabs on the back cover. Do not put

pressure on the LCD panel with your knuckles; microscopic fractures in the

panel could result. Separate the bottom first and then proceed to each side,

leaving the top of the assembly until last. When the bottom and sides have

been released from the hidden tabs, proceed to the left corner. Lift the corner

of the front bezel out to the side, until the hidden corner tab is freed. Repeat

the procedure for the other corner, and lift up on the front bezel to release it

from the back cover. Lift the back cover over the latch.

When replacing the front bezel, orient the bezel in its original position on the

assembly and press firmly near each tab until the bezel snaps into place. Ensure

that the LCD wiring harness and the inverter cable are routed correctly and are

not pinched.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 111 112

Pas de commentaire

Dell Inspiron 3000 Manuel d'utilisateur Page 100