Dell Latitude D600 Manuel d'utilisateur télécharger pdf (Page 12)



Display Bezel



1. Follow the instructions in "Preparing to Work Inside the Computer."

2. Remove the keyboard.

3. Remove the display assembly.

4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of the bezel.

5. Remove the six M2 x 5-mm screws located on the front of the bezel.



6. Startingatthebottomofthedisplaypanel(bytheDell™logo),useyourfingerstoseparatethebezelfromthetopcoverbyliftingtheinsideedgeof

the bezel away from the top cover.



Display Panel



display bumpers (6)

6R933

top cover

8M669

M2 x 5-mm screws (6)

1428U

flex-cable retention bracket

4270E

display bezel

6M873

flex cable

6M871

display panel

See MINI RSL

M2 x 5-mm screws (4)



CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Commentaires sur ces manuels

Pas de commentaire

Dell Latitude D600 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Carnets de notes Dell Latitude D600