Dell Latitude E5500 Manuel d'utilisateur télécharger pdf (Page 29)

Back to Contents Page

 Fan

Dell™Latitude™E5400andE5500ServiceManual

Removing the Fan

Replacing the Fan

Removing the Fan



1. Follow the instructions in Before Working on Your Computer.



2. Remove the bottom of the base assembly (see Removing the E5400 Bottom of the Base Assembly or Removing the E5500 Bottom of the Base

Assembly).



3. Remove the two M2.5 x 8-mm screws that secure the fan to the base of the computer.



4. Disconnect the fan connector from the system board connector, and remove the fan.

Replacing the Fan



1. Align the screw holes on the fan with the holes on the base of the computer.



2. Replace the two M2.5 x 8-mm screws to secure the fan to the base of the computer.



3. Connect the fan connector to the system board connector.



4. Replace the bottom of the base assembly (see Replacing the E5400 Bottom of the Base Assembly or Replacing the E5500 Bottom of the Base Assembly).



5. Follow the procedures in After Working on Your Computer.

Back to Contents Page



CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

M2.5 x 8-mm screws (2)

fan connector

fan



CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: This procedure assumes that you have completed the removal procedure first.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 72 73

Pas de commentaire

Dell Latitude E5500 Manuel d'utilisateur Page 29