Dell Latitude E6400 XFR (Mid 2008) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Carnets de notes Dell Latitude E6400 XFR (Mid 2008). Dell Latitude E6400 XFR (Mid 2008) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Replacing the System Board
About Warnings
WARNING: A WARNING indicates a potential for property damage, personal injury,
or death.
Setting the AMT Manageability Mode
NOTE: For Dell™ Latitude™ E5400 and E5500 computers, and for Dell Precision™
M6400 Mobile Workstations, skip this section and see "Programming the Service Tag"
on page 3.
WARNING: Before you begin any of the procedures in this section, read the safety
information that shipped with your computer. For additional safety best practices,
see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: If you need to remove the bottom access panel, first disconnect the
AC adapter and modem cables from all electrical outlets.
CAUTION: Follow the instructions carefully to ensure that you configure the
computer for the correct management mode.
1
Remove the bottom access panel (see your
Service Manual
).
2
Take note of the label that is attached to the inside of the bottom access panel.
label
label
March 2009
R939Ham1-edited.fm Page 1 Tuesday, November 3, 2009 4:59 PM
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Replacing the System Board

Replacing the System BoardAbout Warnings WARNING: A WARNING indicates a potential for property damage, personal injury, or death.Setting the AMT Mana

Page 2

You should see one of the following four configuration-mode labels on the inside of the chassis: NOTE: If the original configuration-mode label is mi

Page 3 - Programming the Service Tag

Programming the Service TagAfter replacing the system board for Latitude E5400, E5500, and Dell Precision M6400 Mobile Workstations, you need to progr

Page 4 - FIPS 201 Compliance

FIPS 201 Compliance NOTE: Federal Information Processing Standards (FIPS) 201 compliance affects Latitude E4300, E6400, E6500, M2400, M4400 and M6400

Commentaires sur ces manuels

Pas de commentaire