Dell UltraSharp 34 Curved Monitor Manuel d'utilisateur télécharger pdf (Page 32)

32 | Setting Up the Monitor

Connecting the USB 3.0 cable

NOTE: To prevent data damage or loss, before changing USB upstream ports, make

sure that NO USB storage devices are in use by the computer connected to the

monitor’s USB upstream port.

After you have completed connecting the Mi

ni-DP to DP/DP/HDMI cable, follow the

procedures below to connect the USB 3.0 cable to the computer and complete your

monitor setup:

1 a. Connect one computer: connect the upstream USB 3.0 port (cable supplied) to

an appropriate USB 3.0 port on your computer.

b. Connect two computers*: connect the upstream USB 3.0 ports to appropriate

USB 3.0 ports on the two computers. Then use the OSD menu to select between

the two USB upstream sources and input sources. See

Toggle Switch PBP

2 Connect

the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.

3 Plug the power cables for your computer(s) and monitor into a nearby outlet.

* When connecting two computers to the monitor, th

e monitor's USB downstream ports

for the keyboard and mouse can be assigned to different input signals from the two

computers by changing the USB Selection settings from the OSD menu. (See

USB

Selection

for details).

a. Connect one computer

b. Connect two computers

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 68 69

Pas de commentaire

Dell UltraSharp 34 Curved Monitor Manuel d'utilisateur Page 32