support.dell.com Removing and Replacing Parts 43
To remove the RJ-11 card (see Figure 32), perform the following these steps:
1. Remove the 4-mm screw securing the RJ-11 card to the system board.
2. Lift the card off the system board.
System Board Removal
Figure 34. System Board Components
This procedure assumes that you have removed the PC Card heat sink and hinge sad-
dles. To remove the system board (see Figure 33), perform the following steps:
1. Remove the three 4-mm screws from the bottom of the computer.
2. Remove the system board from the bottom case.
1
4-mm screws (3)
2
System board
Commentaires sur ces manuels