Dell PowerVault NX3100 Manuel du propriétaire télécharger pdf (Page 60)

60 Using the System Setup Program and UEFI Boot Manager

Embedded System Management

The Lifecycle Controller is an embedded utility that enables systems

management tasks from an embedded environment throughout the server’s

lifecycle.

The controller can be started during the boot sequence and can function

independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features

provided by the controller.

The following features of the Lifecycle Controller are supported on systems

with Baseboard Management Controller (BMC):

• Installing an operating system

• Running diagnostics to validate the memory, I/O devices, processors,

physical disks, and other peripherals

When an iDRAC6 Express card is installed, the controller provides the

following additional features:

• Downloading and applying firmware updates

• Configuring hardware and firmware

For more information about setting up the controller, configuring hardware

and firmware, and deploying the operating system, see the

Lifecycle Controller

User Guide

on the Dell Support website at support.dell.com/manuals.

iDRAC Configuration Utility

The iDRAC Configuration Utility is a pre-boot configuration environment

that allows you to view and set parameters for the iDRAC6 and for the

managed server. The iDRAC Configuration Utility enables you to:

• Configure, enable, or disable the iDRAC6 local area network (LAN)

through the dedicated iDRAC6 Enterprise card port or the

embedded NICs.

• Enable or disable IPMI over LAN.

• Enable a LAN Platform Event Trap (PET) destination.

• Attach or detach the Virtual Media devices.

book.book Page 60 Wednesday, March 3, 2010 10:37 AM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 163 164

Pas de commentaire

Dell PowerVault NX3100 Manuel du propriétaire Page 60