Dell SR2320L Manuel d'utilisateur télécharger pdf (Page 28)



Connecting the Monitor

To connect your monitor to the computer perform the following steps/instructions:

1. Turnoffyourcomputeranddisconnectthepowercable.

2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your

computer.Donotuseallthecablesonthesamecomputer. Use all of the cables only when they are connected to different computers with appropriate

video systems.



Connecting the blue VGA cable

Connecting the White DVI Cable*

Connecting the HDMI Cable* (for selective models)

After you have completed connecting the VGA/DVI/HDMI cable, follow the procedure below to complete your monitor setup:

1. Plugthepowercablesforyourcomputerandmonitorintoanearbyoutlet.

2. Turn on the monitor and the computer.

WARNING: Before you begin any of the procedures in this section, follow the safety instructions.

NOTE: *Optional purchase item. To purchase DVI or HDMI cable, please visit Dell.com

NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

Dell SR2320L Manuel d'utilisateur Page 28