Dell KVM 1081AD/ KVM 2161AD Manuel d'utilisateur télécharger pdf (Page 18)

18xxx | Installationxxx

If the product was installed in a directory other than the default, then execute

the following command from a shell:

<path>/Dell_Remote_Console_Switch_Software

-or-

If a desktop shortcut was created on installation, double-click the shortcut.

Configuring Switches and Target Devices

This section provides an overview of configuration steps for the switch and for

user access to target devices. For switch-specific information, see the

Installation and User Guide

for the switch.

To add switches, complete the following steps:

1 Install the software on one or more client computers.

2 Open the software on a client computer.

3 Use the Explorer to set unit properties, options, and other customization as

needed.

4 Configure the names of all target devices using the local GUI interface.

5 Repeat steps 3 through 6 for each switch you want to manage.

6 After one software environment is set up, select File - Database - Save to

save a copy of the local database with all the settings.

7 From the software on a second computer, select File - Database - Load and

browse to find the saved file. Select the file and then click Load. Repeat this

step for each client computer that you want to setup.

8 To access a target device attached to an switch, select the target device in

the Explorer and click the Connect Video or Browse button to open a

session (only the corresponding button for the selected target device is

visible).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 111 112

Pas de commentaire

Dell KVM 1081AD/ KVM 2161AD Manuel d'utilisateur Page 18