Dell KVM 1081AD/ KVM 2161AD Manuel d'utilisateur télécharger pdf (Page 28)

20xxx | Installationxxx

Installing the Switch

The switch may be mounted in the 1U rear-rack, 1U front-rack, 1U two-post

(flush and center), and 0U configurations. The following are examples of 1U rear-

rack, 1U front-rack, and 0U configurations. For 1U two-post (flush and center)

configurations, you can slide the switch into the rails in the same manner as the

four-post configurations.

1U Rear-rack Installation

1 Insert the ends of the rails that are attached to the switch into the

ReadyRails assembly and push the switch into the rack (Figure 2.5, item 1).

Figure 2.5: 1U Rear-rack Installation

2 Secure each switch rail with the thumbscrew (item 2).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 139 140

Pas de commentaire

Dell KVM 1081AD/ KVM 2161AD Manuel d'utilisateur Page 28