Dell KVM 2162DS Manuel d'utilisateur télécharger pdf (Page 74)

64xxx | Local and Remote Configurationxxx

4 Select outlet 5 to display the Power Devices Outlet Settings page.

5 Select Link to Target Device, select Group2 from the drop down menu.

6 Click Save. After returning to the Outlet List, outlets 4 and 5 will have the

same name.

Figure 3.4: Target Overview for Group2

Default Outlet Names

On the Power Devices page, the checkbox “Assign Default Names to Outlets”

controls whether or not power outlets are given default names for a power

device, as shown in the following figure. Only power outlets with names are

listed on the Target page. Default assigned power outlet names may be removed

by clearing the "Assign Default Names to Outlets" checkbox and saving. Power

outlets without names are assigned default names by turning on “Assign Default

Names to Outlets” and saving.

Figure 3.5: RCS Power Devices Page

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 187 188

Pas de commentaire

Dell KVM 2162DS Manuel d'utilisateur Page 74