Dell Metered PDU LCD Manuel d'utilisateur Page 40
- Page / 90
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
40
|
LCD Operation
Table 10. Alarms , Notices, and Events
Name
Description Type
L1 Over Current Warning The Phase 1 input current amperage (A) reading is
greater than the value configured as the over current
warning threshold. This warning indicates that the
current A reading is approaching the value set for the
over current alarm.
Generates an alarm and is logged in the Event Log.
Notice
L2 Over Current Warning The Phase 2 input current amperage (A) reading is
greater than the value configured as the over current
warning threshold. This warning indicates that the
current A reading is approaching the value set for the
over current alarm.
Generates an alarm and is logged in the Event Log.
Notice
L3 Over Current Warning The Phase 3 input current amperage (A) reading is
greater than the value configured as the over current
warning threshold. This warning indicates that the
current A reading is approaching the value set for the
over current alarm.
Generates an alarm and is logged in the Event Log.
Notice
L1 Over Current Alarm The Phase 1 input current amperage (A) reading is
greater than the value configured as the over current
alarm threshold.
Generates an alarm and is logged in the Event Log.
Alarm
L2 Over Current Alarm The Phase 2 input current amperage (A) reading is
greater than the value configured as the over current
alarm threshold.
Generates an alarm and is logged in the Event Log.
Alarm
L3 Over Current Alarm The Phase 3 input current amperage (A) reading is
greater than the value configured as the over current
alarm threshold.
Generates an alarm and is logged in the Event Log.
Alarm
L1 Low Current Warning The Phase 1 input current amperage (A) reading is less
than the value configured as the low current warning
threshold. This warning indicates that the current A
reading is approaching the value set for the low current
alarm.
Generates an alarm and is logged in the Event Log.
Notice
L2 Low Current Warning The Phase 2 input current amperage (A) reading is less
than the value configured as the low current warning
threshold. This warning indicates that the current A
reading is approaching the value set for the low current
alarm.
Generates an alarm and is logged in the Event Log.
Notice
L3 Low Current Warning The Phase 3 input current amperage (A) reading is less
than the value configured as the low current warning
threshold. This warning indicates that the current A
reading is approaching the value set for the low current
alarm.
Generates an alarm and is logged in the Event Log.
Notice
- User's Guide 1
- Notes and Warnings 2
- Table of Contents 3
- 5 LCD Operation 4
- 6 Serial Interface Operation 4
- 7 Web Interface Operation 5
- Introduction 7
- Physical Description 9
- Strain Relief Brackets 10
- Ground Bonding Point 10
- Delta and Wye Configurations 10
- Attached Input Connections 11
- Circuit Breakers 11
- S Dry contact sensor 12
- Finding Information 13
- Safety Warnings 14
- Installation 15
- Inspecting the Equipment 16
- Checking the Accessory Bag 16
- Preparing for Installation 17
- Installing Deep Mounting Pegs 18
- Attaching the Ground Wire 21
- Starting the rPDU 22
- Shutting Down the rPDU 22
- Front Panels 23
- Figure 12. DELLM0002 24
- Figure 13. DELLM0003 24
- Figure 15. DELLM0005 25
- Figure 16. DELLM0006 26
- Figure 17. DELLM0007 26
- External Signaling Ports 27
- Serial Port 28
- Monitoring Ports 29
- Dry Contact Sensor (Optional) 30
- LCD Operation 31
- Input Status Screen 33
- Main Menu Selections 34
- Performance Menu 35
- time and date stamp 38
- Alarms Menu 39
- Event Log 42
- System Info 43
- Settings 43
- Serial Interface Operation 50
- Nomenclature 51
- 4 Go to Step 9 52
- (Three-phase rPDUs only) 56
- Log out of the serial CLI 58
- Web Interface Operation 66
- Accessing the Web Interface 68
- Configuring User Access 69
- Setting the Date and Time 70
- Configuring DPI Attributes 73
- 3 Click Save 76
- Viewing Present rPDU Status 81
- Monitoring Input Statistics 83
- Managing Environment Sensors 86
- Humidity 87
- Viewing Event and Data logs 88
- Clearing Logs 89
- To restart the rPDU NMC: 90
- This procedure is completed 90
Produits connexes et manuels pour Matériel informatique Dell Metered PDU LCD
(6 pages)
(138 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels