Dell PowerVault DP500 Manuel d'utilisateur télécharger pdf (Page 21)

Configuring Your System Remotely 21

Configuring Your System Remotely

Special Administration Console (SAC)

NOTE: Using SAC requires a female-to-female serial console cable to connect

directly from a client system to the PowerVault storage system’s serial port, as

shown in Figure 2-1.

Figure 2-1. Using the Console Cable to Connect to SAC

NOTE: Ensure that the terminal emulation software settings on the client system

are set to 115200 baud, 8 data bits, No parity, and 1 stop bit.

In a non-DHCP environment, use command-line interface (CLI) support in

SAC to connect (through a serial port) to a system running Windows Storage

Server 2003. Then, configure network settings. After you configure the

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Pas de commentaire

Dell PowerVault DP500 Manuel d'utilisateur Page 21