Dell PowerVault MD3000 Manuel d'utilisateur télécharger pdf (Page 12)

12 About Your System

NOTICE: This system does not support user-customizable operating modes. Therefore, the split mode LED and

enclosure mode switch are not functional. However, if additional expansion enclosures are daisy chained to your

system, the enclosure mode switch on the RAID array enclosure must be in single-mode position. For more

information, see "Cabling Your RAID Enclosure" on page 21.

Physical Disk Carrier LED Indicators

Each physical disk carrier in your enclosure has two LEDs: an activity LED (green) and a bicolor

(green/amber) status LED (see Figure 1-3). The activity LED flashes whenever the physical disk is

accessed. Table 1-3 lists the flash patterns for the status LED.

Figure 1-3. Physical Disk Carrier LED Indicators

Enclosure mode switch Unused in this system.

1 activity LED 2 status LED

Table 1-3. Physical Disk Carrier Status LEDs

Status LED Description

Off Physical disk not yet discovered by server or an

unsupported disk is present

Steady green Physical disk is online

Table 1-2. Front-Panel Components (continued)

Component Icon Condition

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 111 112

Pas de commentaire

Dell PowerVault MD3000 Manuel d'utilisateur Page 12