Dell UPS 1000T Manuel d'utilisateur télécharger pdf (Page 10)

Dell UPS Management Software: Common Software Installation Scenarios

Figure 5: ULNM edit modules settings

Secondary server ULNM configuration:

To perform a network scan for the primary ULNM server IP address:

“Auto Discovery”  “Range Scan”  Create a new range for the IP address of the primary ULNM

server. For example, scan from 192.168.0.10 to 192.168.0.10 if your primary ULNM agent is

running on a server with IP address 192.168.0.10). Enter Administrator password for the primary

ULNM agent in this scan. Confirm the primary ULNM node is now shown in the “Auto Discovery”

menu.

Figure 6: ULNM range scan

Figure 7: ULNM Settings  Auto Discovery

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Dell UPS 1000T Manuel d'utilisateur Page 10