Dell UPS 500T Manuel d'utilisateur télécharger pdf (Page 35)

Operation

Control Screens

Table 6 describes the available control screens.

Table 6. Control Screens

Control Screens

Description

Battery Test Schedule Battery Test: yes | Cancel Battery test: no

Starts a manual battery test.

See “Testing Batteries” on page 53.

Reset Error State Reset Alarms: yes | no

Manually clears any latched alarms, such as bad battery detected or DC Bus

OV/UV.

If a bad battery alarm was also active, reset the battery test status to “Not

Tested.”

Load Segments Load segment 1: on | off

Load segment 2: on | off

These on/off commands override automatic load segment on/off controls made by

the Automatic Start Delay and Automatic On Battery Shutdown settings. See

“Configuring Load Segments” on page 41.

Restore Factory Settings Restore Factory Settings: yes | no

Available only in Standby mode.

Restoring the factory settings:

S Returns all user-configurable EEPROM settings to default factory settings

S Resets all pending on/off commands

S Clears the Event Log and resets all time stamps

S Resets the battery test status

S Initiates the Self Diagnostics test

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 62 63

Pas de commentaire

Dell UPS 500T Manuel d'utilisateur Page 35