Dell Alienware Aurora Manuel d'utilisateur télécharger pdf (Page 73)

073

CHAPTER 14: MASTER I/O BOARD

Replacing the Master I/O Board

Follow the instructions in “Before You Begin” on page 1. 6.

Place the master I/O board in the chassis.2.

Replace the four screws that secure the master I/O board to the chassis.3.

Route and connect the cables that you removed from the connectors on the 4.

master I/O board.

NOTE: For information on master I/O board connectors, see “Master I/O

Board Components” on page 15.

Replace the PCI-fan assembly (see “Replacing the PCI-Fan Assembly” on 5.

page 45).

Replace the drive-bay shroud (see “Replacing the Drive-Bay Shroud” on 6.

page 19).

Close the PCI shroud (see “Closing the PCI Shroud“ on page 7. 18).

Replace the left side-panel (see “Replacing the Left Side-Panel“ on page 8. 11).

Connect your computer and devices to electrical outlets, and then turn 9.

them on.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 116 117

Pas de commentaire

Dell Alienware Aurora Manuel d'utilisateur Page 73