Dell Dimension 3000 Manuel d'utilisateur télécharger pdf (Page 26)



5. Disconnect the fan power cable from its connector on the system board.



6. Pull the fan release lever away from the back of the computer and slide the fan toward the release lever.



7. Remove the fan assembly from the computer.



Replacing the Fan Assembly



1. Align the fan assembly tabs with the holes in the back of the computer.



2. Slide the fan assembly away from the fan release lever until it clicks in place.



3. Reconnect the DC power cables to the drives and system board.



4. Replace the computer cover.



5. Connect the AC power cable to the AC power connector on the back of the power supply.



6. Connect your computer and devices to electrical outlets, and turn them on.

System Board



Removing the System Board

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Pas de commentaire

Dell Dimension 3000 Manuel d'utilisateur Page 26