Dell Dimension 3100C Manuel d'utilisateur télécharger pdf (Page 65)

Removing and Installing Parts 65

Align the notch on the bottom of the module with the crossbar in the connector.

NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you

apply equal force to each end of the module.

Insert the module into the connector until the module snaps into position.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

Replace the computer cover. See "Replacing the Computer Cover" on page 84.

NOTICE: To connect a network cable, first plug the cable into the network port or device, and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and turn them on

When a message appears stating that memory size has changed, press <F1> to continue.

Log on to your computer.

Right-click the

My Computer

icon and click

Properties

Click the

General

tab.

To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

cutouts (2)

notch

memory module

crossbar

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 133 134

Pas de commentaire

Dell Dimension 3100C Manuel d'utilisateur Page 65