Dell OptiPlex FX160 Manuel d'utilisateur télécharger pdf (Page 17)

DELL™ OPTIPLEX™ FX160 TECHNICAL GUIDEBOOK

OPTIMAL SYSTEM

PLACEMENT

The orientation and location of your computer

installation can have affect on your system

performance.

S Y S T E M O R I E N T A T I O N

For optimal thermal and acoustic performance,

install the computer in the vertical orientation,

using the included stand, or the optional

mounting brackets (as shown below).

S Y S T E M S P A C I N G

The OptiPlex FX160 is designed to have high performance while operating with low

acoustics noise. This is made possible, in part, by the large amount of ventilation on

the system. To ensure that the system functions optimally, the ventilation should not

be blocked.

S T A N D

When using the system with the provided stand, please ensure that the system is

unobstructed on the vented surfaces. Dell recommends the following:

Top

Ensure there is at least 2 inches (50.8 mm) of clearance

above the system. This gap will allow higher temperature

air to exit the system easily.

Bottom (surface that stand attaches to)

Room temperature air enters the bottom of the system

through the stand, on the left side of the system (as

indicated by the arrow). Ensure this area is not

obstructed.

Right side (as shown in the drawing to the right)

Ensure that there is at least 1 inch (25.4 mm) clearance

for optimal system cooling.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Dell OptiPlex FX160 Manuel d'utilisateur Page 17