Dell OptiPlex GX270 Manuel d'utilisateur télécharger pdf (Page 17)

4. Slide the power supply toward the front of the computer approximately 1 inch.

5. Lift the power supply up and out of the computer.

Replacing the Power Supply

1. Slide the power supply into place.

2. On the small mini-tower computer, replace the two screws that secure the power supply to the back of the computer frame.

3. Reconnect the DC power cables.

4. Connect the AC power cable to the connector.

5. On the small desktop computer, reattach the power cables to the side of the hard drive and replace the expansion-card cage.

6. Run the cables underneath the clips, and press the clips to close them over the cables.

7. Close the computer cover.

8. Attach the computer stand, if it is used.



9. Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page



NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Dell OptiPlex GX270 Manuel d'utilisateur Page 17