Dell M210X Guide de l'utilisateur télécharger pdf (Page 15)

Using Your Projector 15

3 To power off the projector quickly, press the Power button and hold for 1

second while the projector’s cooling fans are still running.

NOTE: Before you turn on the projector again, wait for 60 seconds to allow the

internal temperature to stabilize.

4 Disconnect the power cord from the electrical outlet and the projector.

Adjusting the Projected Image

Raising the Projector Height

1 Press the Elevator button.

2 Raise the projector to the desired display angle, and then release the button to

lock the elevator foot into position.

3 Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1 Press the Elevator button.

2 Lower the projector, and then release the button to lock the elevator foot into

position.

1 Elevator button

2 Elevator foot (Angle of tilt: 0 to 9.5 degree)

3 Tilt adjustment wheel

3 3

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Pas de commentaire

Dell M210X Guide de l'utilisateur Page 15