Dell POWEREDGE R515 Manuel d'utilisateur télécharger pdf (Page 29)

Migrating to a Dell PowerEdge R515 server from two legacy database servers

APPENDIX B – PREPARING THE STORAGE

For our sample migration, we used only internal storage on the Dell

PowerEdge R515. On our server, we configured two disks in a RAID 1

configuration and the remaining six disks in a RAID 10 configuration.

This created a C: drive and E: drive in our host operating system. We

stored all virtual machine files and virtual hard drives on the E: drive,

our six disk RAID 10 volume. Below, we cover the specifics on

configuring the internal storage.

Configuring the internal storage

1. During the boot process, Press Ctrl+R to enter the PERC BIOS

Configuration Utility.

2. Highlight the controller, press F2, and choose to create the new

virtual disk.

3. Provide the desired RAID setting, such as RAID 1, 5, 10, and so on.

Choose the relevant disks for this volume.

4. Press OK to complete the volume configuration.

5. Highlight the new virtual disk, press F2, then Initialization, and

then Start Init. This will fully initialize your virtual disk.

6. Repeat steps 2 through 5 for the remaining virtual disks in your

server.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Pas de commentaire

Dell POWEREDGE R515 Manuel d'utilisateur Page 29