Dell MD3000i Guide de dépannage Page 26
- Page / 76
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
26 Preparing Your Systems for Clustering
To assign drive letters, create mount points, and format the disks on the
shared storage system:
1
Turn off the remaining node(s) and open
Disk Management
on node 1.
2
Allow Windows to enter a signature on all new physical or logical drives.
NOTE: Do not create dynamic disks on your hard drives.
3
Locate the icon for the first unnamed, unformatted drive on the shared
storage system.
4
Right-click the icon and select
Create
from the submenu.
If the unformatted drives are not visible, verify the following:
• The HBA driver is installed.
• The storage system is properly cabled to the servers.
• The LUNs and hosts are assigned through a storage group (if
Access
Control
is enabled).
5
In the dialog box, create a partition the size of the entire drive (the
default) and then click
OK
.
NOTE: The MSCS software allows only one node to access a logical drive at
a time. If a logical drive is partitioned into multiple disks, only one node is able
to access all the partitions for that logical drive. If a separate disk is to be
accessed by each node, two or more logical drives must be present in the
storage system.
6
Click
Yes
to confirm the partition.
7
With the mouse pointer on the same icon, right-click and select
Change Drive Letter and Path
from the submenu.
8
Assign a drive letter to an NTFS volume or create a mount point.
To assign a drive letter to an NTFS volume:
a
Click
Edit
and select the letter you want to assign to the drive
(for example, Z).
b
Click
OK
.
c
Go to step 9.
- Software Installation and 1
- Troubleshooting Guide 1
- Notes, Notices, and Cautions 2
- Contents 3
- 6 Contents 6
- Introduction 7
- Cluster Solution 8
- Operating System 9
- Cluster Nodes 10
- Cluster Storage 11
- Other Documents You May Need 12
- Installation Overview 15
- Selecting a Domain Model 17
- Windows Operating System 18
- Windows Server 2003 23
- Dual-Port Network Adapters 23
- Storage Systems 28
- Verifying Cluster Readiness 32
- Verifying MSCS Operation 34
- Obtaining More Information 34
- Software 35
- Cluster Objects 37
- Cluster Networks 37
- Network Interfaces 38
- Cluster Resources 39
- Resource Dependencies 40
- Resource Parameters 41
- Quorum Resource 42
- Resource Failure 42
- Configuring Failover 43
- Creating a New Resource 44
- Deleting a Resource 45
- File Share Resource Type 46
- Failover Policies 48
- N + I Failover 49
- Configuring Group Affinity 50
- Failover Pair 50
- Multiway Failover 51
- Failover Ring 52
- Failover 53
- Failback 53
- Maintaining Your Cluster 55
- Same IP Subnet 56
- Microsoft Windows Server 2003 57
- Reformatting a Cluster Disk 59
- Before You Begin 61
- Completing the Upgrade 62
- Troubleshooting 63
- 64 Troubleshooting 64
- 66 Troubleshooting 66
- 68 Troubleshooting 68
- 70 Troubleshooting 70
- 72 Troubleshooting 72
- Index 73 73
- Index 75 75
Produits connexes et manuels pour Réseaux de disques Dell MD3000i
Réseaux de disques Dell H800 Spécifications
(23 pages)
(23 pages)
Grandview GPCK-MA manuály
Uživatelské manuály a uživatelské příručky pro Projektory Grandview GPCK-MA.
Poskytujeme 1 manuály pdf Grandview GPCK-MA ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels