Dell PowerVault MD3860f Manuel du propriétaire télécharger pdf (Page 37)

Replacing The SFP+ Transceiver

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

The SFP+ transceivers are used to connect the Fibre Channel cables to the MD3860f storage enclosure.

1. Locate and identify the faulty SFP+ transceiver.

2. Disconnect the interface cables from the SFP+ transceiver.

3. Remove the failed SFP+ transceiver from the controller.

Figure 24. Replacing the SFP+ Transceiver

1. FC IN slot (4) 2. SFP+ transceiver

3. fibre optic cable 4. gate

4. Install the new SFP+ transceiver into the controller.

5. Reconnect the interface cable.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Pas de commentaire

Dell PowerVault MD3860f Manuel du propriétaire Page 37