Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage télécharger pdf (Page 15)

Removing the Display Hinges



1. Follow the instructions in Before You Begin.



2. Remove the display assembly (see Display Assembly).



3. Remove the display bezel (see Removing the Display Bezel).



4. Remove the display panel (see Removing the Display Panel).



5. Remove the M2.5 x 5-mm screw from the right display hinge.



6. Lift the right display hinge off the two alignment pins and out of the top cover.



7. Repeat step 5 and step 6 for the left display hinge.

Back to Contents Page



top flex-cable

connector

flex-cable release levers

(2)

back of display panel

inverter board

bottom flex-cable

connector

pull-tab on bottom flex-cable

connector

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

M2.5 x 5-mm screw

display hinges (2)

(left and right)

top cover

alignment pin



1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Pas de commentaire

Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage Page 15