Dell Inspiron 7000 Manuel d'utilisateur télécharger pdf (Page 40)

HingeSaddleRemoval:Dell™Inspiron™7000

This procedure assumes that you have removed the PC Card heat sink and LVDS board. To remove the hinge saddles, follow these steps:

1. Remove the (4) 4-mm screws from the top of the left and right hinge saddles.

2. Remove the (4) 4-mm screws from the back of the computer above the ports.

3. Remove the 10-mm screw and 20-mm screw from the right hinge saddle and remove the saddle.

4. Remove the 10-mm screw and 20-mm screw from the left hinge saddle and remove the saddle.

5. Disconnect the LED cable from connector J6 on the system board.

6. Remove the 6-mm screw from the plastic frame, remove any tape, and remove the plastic frame.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 103 104

Pas de commentaire

Dell Inspiron 7000 Manuel d'utilisateur Page 40