Dell Latitude CP M233XT - Latitude CP - Pentium MMX 233 MHz Spécifications télécharger pdf (Page 71)

Removing and Replacing Parts 4-35

/&',QYHUWHU%RDUG

The following subsections describe how to remove an LCD inverter board from

a 12.1-inch or 13.3-inch LCD display.

,QFK/&''LVSOD\

Note the placement of the EMI shield over the lower screw boss, and the

routing of the LCD-panel power cable around the upper screw boss.

NOTE: When installing the inverter board, connect the LCD interface cable to

the board prior to securing the board in the display-assembly top cover. After

installing the inverter board, ensure that the LCD-panel power cable is routed

around the plastic screw bosses in the display-assembly top cover.

LCD inverter board

display-assembly top cover

connector J1

connector J2

5-mm

screws (2)

spacer (2)

LCD-assembly

power cable

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 92 93

Pas de commentaire

Dell Latitude CP M233XT - Latitude CP - Pentium MMX 233 MHz Spécifications Page 71