Dell CDPR3 Guide de l'utilisateur télécharger pdf (Page 22)

Install Ink Cartridges

The printer is shipped without ink cartridges installed. Before installing the ink

cartridges in the Liberty printer, allow the cartridge to reach room temperature before

installing it. Store ink cartridges at a temperature between 50–90°F (10–32 °C) and

avoid moisture and direct sunlight.

1. With the power still on, open the top cover. The ink cartridge cradle moves into

position to install the ink cartridges.

1 – Top Cover 2 – Cradle Latches 3 – Cartridge Cradle

2. Raise the cradle latches.

3. Remove each ink cartridge from its packaging.

4. Carefully remove the plastic tape. Hold the ink cartridge so that the copper strip is

on the bottom (see below). Do not remove the copper strips and do Not touch the

ink nozzles!

1 – Plastic Tape 2 – Ink Nozzles

3 – Copper Strip 4 – Ink Cartridge

Installation 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Pas de commentaire

Dell CDPR3 Guide de l'utilisateur Page 22