Dell Metered Rack Power Distribution Unit Guide de l'utilisateur Page 17
- Page / 90
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
17
Installation
|
Preparing for Installation
Before installing the rPDUs in a rack enclosure, consider location and orientation. For most installations, the
selected location and orientation depends on the number of rPDUs that will be installed and the cable
management plan.
For example, suppose you plan to separate data and power cables on opposite sides of the rack enclosure. For this
configuration, install one or two rPDUs in the same tray. Route the data cables to the other rPDU tray (serving
as a cable channel) on the opposite side of the rack enclosure.
Another plan might be to balance the data and power cables on each side. For this configuration, install one
rPDU on each side of the rack enclosure. The remaining portion of each rPDU tray serves as a cable channel for
bundled and properly dressed data cables running beside the rPDU.
Other considerations include the orientation of the rPDU and the type of strain relief brackets mounted on the
rPDUs.
Installing Hardware for Options
Install the hardware that supports installation options before installing the rPDUs in the rack enclosure. This
includes the following:
S Strain relief brackets for cord management (optional kit)
S Deep mounting pegs for the 90° mounting option (supplied)
NOTE:
The factory-installed standard mounting pegs are secured to the chassis by two 8-32 3/7” mounting screws. The
user-installed deep mounting pegs are secured to the chassis by two 8-32 5/8” mounting screws.
Installing Strain Relief Brackets
To install the optional strain relief brackets:
1 Place the rPDU on a flat, stable surface.
2 Align the screw mounting holes on the rPDU with the screw mounting holes on the bracket (see Figure 6).
3 Secure the bracket with the supplied screws.
4 Are you installing deep mounting pegs for 90° installation?
If no, go to “Installing the rPDU in the Rack Enclosure” on page 19.
If yes, continue to the next section, “Installing Deep Mounting Pegs” on page 18.
- User's Guide 1
- Notes and Warnings 2
- Table of Contents 3
- 5 LCD Operation 4
- 6 Serial Interface Operation 4
- 7 Web Interface Operation 5
- Introduction 7
- Physical Description 9
- Strain Relief Brackets 10
- Ground Bonding Point 10
- Delta and Wye Configurations 10
- Attached Input Connections 11
- Circuit Breakers 11
- S Dry contact sensor 12
- Finding Information 13
- Safety Warnings 14
- Installation 15
- Inspecting the Equipment 16
- Checking the Accessory Bag 16
- Preparing for Installation 17
- Installing Deep Mounting Pegs 18
- Attaching the Ground Wire 21
- Starting the rPDU 22
- Shutting Down the rPDU 22
- Front Panels 23
- Figure 12. DELLM0002 24
- Figure 13. DELLM0003 24
- Figure 15. DELLM0005 25
- Figure 16. DELLM0006 26
- Figure 17. DELLM0007 26
- External Signaling Ports 27
- Serial Port 28
- Monitoring Ports 29
- Dry Contact Sensor (Optional) 30
- LCD Operation 31
- Input Status Screen 33
- Main Menu Selections 34
- Performance Menu 35
- time and date stamp 38
- Alarms Menu 39
- Event Log 42
- System Info 43
- Settings 43
- Serial Interface Operation 50
- Nomenclature 51
- 4 Go to Step 9 52
- (Three-phase rPDUs only) 56
- Log out of the serial CLI 58
- Web Interface Operation 66
- Accessing the Web Interface 68
- Configuring User Access 69
- Setting the Date and Time 70
- Configuring DPI Attributes 73
- 3 Click Save 76
- Viewing Present rPDU Status 81
- Monitoring Input Statistics 83
- Managing Environment Sensors 86
- Humidity 87
- Viewing Event and Data logs 88
- Clearing Logs 89
- To restart the rPDU NMC: 90
- This procedure is completed 90
Produits connexes et manuels pour Unités de distribution d'électricité (PDU) Dell Metered Rack Power Distribution Unit
(8 pages)Electrolux Air-O-Convect AOS102GCD1 manuals
Owner’s manuals and user’s guides for Convection ovens Electrolux Air-O-Convect AOS102GCD1.
We providing 1 pdf manuals Electrolux Air-O-Convect AOS102GCD1 for download free by document types: User Manual
Commentaires sur ces manuels