Dell 1710/n Mono Laser Printer Manuel d'utilisateur télécharger pdf (Page 79)

Select the poster size you want by choosing the number of pages to use in the poster.5.

To print crop marks on the pages, select Print crop marks.6.

Select the amount of overlap you want each page to have.7.

Click OK twice.8.

Click OK on the Print window to send the job to print.9.

Printing on Letterhead

To print on letterhead, make sure the paper is loaded with the proper orientation.

Make sure the letterhead is properly loaded according to the paper source you are using:

Tray 1 or 2-Load the letterhead paper with the design side facing down. The top edge of the

sheet with the logo should be placed at the front of the tray.

Manual feeder-Load the letterhead paper face-up, with the top of the sheet first.

NOTE: If you are using the manual feeder, first send the job to print, then load the letterhead when

the printer displays the Load Manual Feeder light sequence (see Manually Feeding a Print Job).

From the computer's software application, select File Print.2.

Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer

driver settings.

Click the Paper tab.4.

Select Letterhead from the Paper type drop-down lists.5.

Select the appropriate paper size and tray.6.

Click OK.7.

Click OK on the Print window to send the job to print.8.

Canceling a Print Job

A print job can be canceled from the operator panel or from your computer. The Cancel Job light sequence

is displayed on the operator panel while the job is being cancelled.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 115 116

Pas de commentaire

Dell 1710/n Mono Laser Printer Manuel d'utilisateur Page 79