Dell Active System Manager Version 7.0 Manuel d'utilisateur télécharger pdf (Page 38)

Active System Manager Solution Guide—Active System 800 (AS800)

3.2.1.4 Starting the Discovery Process

To start the Discovery process, perform the following steps:

1. Connect to the Active System Manager Client using user credentials with Administrator

privileges.

2. On the menu bar, click Tools >Discovery >Start, which initiates the discovery process for

components that were set up during the discovery configuration setup.

Figure 33. Tools > Discovery > Start

Note:

 You can view the discovery progress indication at the task bar shown in the bottom of

the client.

 Ifdiscovery progress is initiated again when a discovery process is already in progress,

the Active System Manager user is prompted with a message, indicating the same.

3. After completing the Active System 800 components discovery, update the following

information manually in the Active System Manager for all blade servers. These parameters will

be used for configuring the ESXi Server with appropriate IP Address, hostname, iSCSI IP Address

etc.

This information can be updated by using the multi-editor feature or by opening individual

server instances. You can launch the multi-editor by selecting multiple server instances and

then clicking Open with Multi-Editor.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 105 106

Pas de commentaire

Dell Active System Manager Version 7.0 Manuel d'utilisateur Page 38