Dell PowerEdge M IO Aggregator Spécifications télécharger pdf (Page 18)

18 Installing and Configuring the Aggregator

Installing the Aggregator in a PowerEdge Chassis

After you unpack the Aggregator, install FlexIO modules in the base module

and slide the Aggregator into one of the open I/O module slots in the back of

a PowerEdge M1000e chassis.

NOTE: If you plug a FlexIO module into an Aggregator that is already powered

on and inserted in an M1000e chassis, you must reboot the Aggregator for the plug-

in module to be activated.

The M1000e chassis is a 10U rack-mountable blade chassis that holds:

• Server blades: Eight full-height or 16 half-height, or 32 quarter-height

blades

• Switch blades: Six I/O modules and two integrated chassis management

controllers

Server blades are installed in the front of the chassis (Figure 1-7); I/O

modules are installed in the back of the chassis (Figure 1-8).

Figure 1-7. PowerEdge M1000e: Front View with Server Blades

16 half-height

server blades

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Pas de commentaire

Dell PowerEdge M IO Aggregator Spécifications Page 18