Dell PowerEdge M IO Aggregator Manuel d'utilisateur télécharger pdf (Page 8)

Please save and reset unit 0 for the changes to take effect.

Dell(conf)#

2. Save the configuration.

Dell#write memory

01:05:48: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-

config to startup-config in flash by default

Dell#reload

Proceed with reload [confirm yes/no]: yes

3. Configure the port-channel with 40G member ports.

Dell#configure

Dell(conf)#interface range fortygige 0/33, fortygige 0/37

Dell(conf-if-range-fo-0/33,fo-0/37)#no shut

Dell(conf-if-range-fo-0/33,fo-0/37)#port-channel-protocol lacp

Dell(conf-if-range-fo-0/33,fo-0/37-lacp)#port-channel 20 mode

active

Dell(conf)#

Dell(conf)#int fortygige 0/49

Dell(conf-if-fo-0/49)#port-channel-protocol lacp

Dell(conf-if-fo-0/49-lacp)#port-channel 21 mode active

Dell(conf-if-fo-0/49-lacp)#

Dell(conf-if-fo-0/49)#no shut

4. Configure the port mode, VLAN, and so forth on the port-channel.

Dell#configure

Dell(conf)#int port-channel 20

Dell(conf-if-po-20)#portmode hybrid

Dell(conf-if-po-20)#switchport

Dell(conf-if-po-20)#no shut

Dell(conf-if-po-20)#ex

Dell(conf)#int port-channel 21

Dell(conf-if-po-21)#portmode hybrid

Dell(conf-if-po-21)#switchport

Dell(conf-if-po-21)#no shut

Dell(conf-if-po-21)#end

Dell#

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 36 37

Pas de commentaire

Dell PowerEdge M IO Aggregator Manuel d'utilisateur Page 8