Dell Networking S6000 Manuel d'utilisateur télécharger pdf (Page 171)

100

101

CONFIG-ROUTER-BGP mode

neighbor {ip-address | peer-group-name} no shutdown

Examples of the show ip /jointfilesconvert/79615/bgp Commands

NOTE: When you change the configuration of a BGP neighbor, always reset it by entering the

clear ip /jointfilesconvert/79615/bgp * command in EXEC Privilege mode.

To view the BGP configuration, enter show config in CONFIGURATION ROUTER BGP mode. To view

the BGP status, use the show ip /jointfilesconvert/79615/bgp summary command in EXEC Privilege mode. The first example

shows the summary with a 2-byte AS number displayed (in bold); the second example shows that the

summary with a 4-byte AS number using the

show ip /jointfilesconvert/79615/bgp summary command (displays a 4–byte AS

number in bold).

The following example shows the show ip /jointfilesconvert/79615/bgp summary command output (2–byte AS number

displays).

R2#show ip /jointfilesconvert/79615/bgp summary

BGP router identifier 192.168.10.2, local AS number 65123

BGP table version is 1, main routing table version 1

1 network entrie(s) using 132 bytes of memory

1 paths using 72 bytes of memory

BGP-RIB over all using 73 bytes of memory

1 BGP path attribute entrie(s) using 72 bytes of memory

1 BGP AS-PATH entrie(s) using 47 bytes of memory

5 neighbor(s) using 23520 bytes of memory

Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx

10.10.21.1 65123 0 0 0 0 0 never Active

10.10.32.3 65123 0 0 0 0 0 never Active

100.10.92.9 65192 0 0 0 0 0 never Active

192.168.10.1 65123 0 0 0 0 0 never Active

192.168.12.2 65123 0 0 0 0 0 never Active

R2#

The following example shows the show ip /jointfilesconvert/79615/bgp summary command output (4–byte AS number

displays).

R2#show ip /jointfilesconvert/79615/bgp summary

BGP router identifier 192.168.10.2, local

AS number 48735.59224