Dell 3030 Manuel du propriétaire télécharger pdf (Page 41)

Option Description

NOTE: This field is only relevant when the Integrated

NIC control in the System Configuration group is set to

Enabled with ImageServer and when Client DHCP is set

to Static IP.

Client SubnetMask Displays the subnet mask of the client. The default setting is

255.255.255.255.

NOTE: This field is only relevant when the Integrated

NIC control in the System Configuration group is set to

Enabled with ImageServer and when Client DHCP is set

to Static IP.

Client Gateway Displays the gateway IP address for the client. The default

setting is 255.255.255.255.

NOTE: This field is only relevant when the Integrated

NIC control in the System Configuration group is set to

Enabled with ImageServer and when Client DHCP is set

to Static IP.

DNS IP Address Displays the DNS IP address of the cleint. The default setting

is 255.255.255.255.

Domain Name Displays the Domain Name of the client.

Advanced Specifies for Advanced debugging

• Verbose Mode (Disabled by default)

Table 13. System Logs

Option Description

BIOS events Displays the system event log and allows you to clear the

log.

• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is

available. For laptops, ensure that your computer battery is fully charged and connected to a power

outlet

1. Re-start the computer.

2. Go to dell.com/support.

3. Enter the Service Tag or Express Service Code and click Submit.

NOTE: To locate the Service Tag, click Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the

instructions on screen.

4. If you are unable to locate or find the Service Tag, click the Product Category of your computer.

5. Choose the Product Type from the list.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Pas de commentaire

Dell 3030 Manuel du propriétaire Page 41