Dell PowerEdge 750 Manuel d'utilisateur télécharger pdf (Page 21)

Rack Installation Guide 1-19

Center-Mount Installation

The two-post rack kit is shipped with the brackets configured for a 7.62-cm (3-inch) wide center-

mount installation. See Figure 1-9 for mounting rail components. To complete the installation,

perform the following steps:

Locate the right mounting rail and push the adjustable mounting bracket toward the back

of the mounting rail (see Figure 1-12).

Position the right mounting rail in the two-post rack at the location you marked, push the

center-mount adjustable mounting bracket forward against the vertical two-post rack, and

secure the mounting flange and adjustable mounting bracket to the rack with four

12-24 x 0.5-inch pan-head Phillips screws (see Figure 1-12).

Repeat step 1 and step 2 to install the left mounting rail in the rack.

Figure 1-12. Installing the Mounting Rails for Center-Mount Configuration

12-24 x 0.5-inch pan-head

Phillips screws (4 per rail)

two-post open-frame rack

mounting rails (2)

release latch

center-mount mounting flange

system rails (2)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 133 134

Pas de commentaire

Dell PowerEdge 750 Manuel d'utilisateur Page 21