Dell PowerVault DR6000 Manuel d'utilisateur Page 127
- Page / 191
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
• Support using a direct block-to-block device copy to ensure that the USB key is bootable
To transfer the RM image to the USB key on a Linux or Unix system, perform the following:
1. Copy the downloaded RM image file to a Linux or Unix system.
2. Insert the USB key into an available USB port on the Linux or Unix system.
Make note of the device name that is reported by the operating system (for example, /dev/sdc4).
3. Do not locally mount the USB device to a file system at this time.
4. Copy the RM image to the USB key using the dd command:
dd if=<path to .img file> of=<usb device> bs=4096k
For example:
dd if=/root/DR-RM-1.05.03.313-2.1.0851.2.img of=/dev/sdc4 bs=4096
Running the Restore Manager (RM)
To run the Dell Restore Manager (RM) utility, boot the DR Series system using the RM USB key created in Creating the
RM USB key).
1. Insert the RM USB key into an available USB port on the system.
You can also use the virtual media option of iDRAC to remotely load the RM USB key. For more information, see
Configuring and Using Virtual Media in the Integrated Dell Remote Access Controller 6 (iDRAC6) User Guide
at
support.dell.com/support/edocs/software/smdrac3/.
2. Boot the DR Series system using the RM USB key.
3. During the time when the Power-On Self-Test (POST) screen displays, press F11 to load the Boot Manager.
4. Within the Boot Manager, navigate to the system hard drive (C:), select the USB key as the boot device, and press
<Enter>.
5. After a few minutes, Restore Manager loads and displays its main screen.
6. Select the desired Restore mode (either Recover Appliance or Factory Reset).
7. Enter the confirmation string, and press <Enter> to proceed.
CAUTION: The Factory Reset mode deletes all DR Series data. The Factory Reset mode should only be used
when the container data is no longer needed.
NOTE: After Restore Manager completes, only the administrator account will remain enabled. To re-enable
the root or service accounts, see the DR Series system CLI user --enable --user command in the
Dell DR
Series System Command Line Reference Guide
.
NOTE: If you had previously joined the DR Series system to any Active Directory Services (ADS) domain
before running Restore Manager, after it completes you will need to manually rejoin the desired ADS domain.
For information about joining an ADS domain, see Configuring Active Directory Settings.
Resetting the Boot LUN Setting in PERC H700 BIOS After Running RM
In the event that both of the 2.5-inch 300 GB 10K RPM 6 GB/s SAS internal drives (OS) in RAID1 are replaced, you must
run the Dell Restore Manager (RM) utility to recover the DR Series system OS drives.
Following the RM recovery process, the boot logical unit number (LUN) has to be reset to VD0 RAID1. The DR Series
system unsuccessfully attempts to boot from RAID6 instead of RAID1.
127
- Dell DR Series System 1
- Administrator Guide 1
- Notes, Cautions, and Warnings 2
- Contents 3
- Source Code Availability 11
- About the DR Series System 13
- Internal Drive Capacity 14
- External Drive Capacity 14
- Streams vs. Connections 19
- Replication 19
- Replication Seeding 20
- Reverse Replication 20
- CIFS ACL Support 22
- Unix Permissions Guidelines 23
- Rapid NFS and Rapid CIFS 24
- DR Series Expansion Shelf 27
- Not Configured 31
- Dell DR2000v Deployment Guide 33
- Local Console Connection 36
- (iDRAC6) User Guide 40
- Dashboard Page and Options 44
- Displaying System Alerts 45
- Health Page: DR4000 System 46
- Health Page: DR4100 System 47
- Health Page: DR6000 System 47
- DR Series System Components 47
- DR Series System Enclosures 48
- Viewing the Latest Range 49
- Viewing a Specific Time Range 50
- System Usage 50
- Container Statistics 50
- Backup Data Pane 51
- Throughput Pane 51
- Replication Pane 51
- Replication Status Pane 52
- Duplication Statistics 53
- Client Statistics 53
- Replication Statistics Page 54
- Storage Page and Options 55
- Containers 56
- Replication Page 57
- Setting a Cleaner Schedule 60
- Networking 61
- Active Directory 61
- Local Workgroup Users 61
- Email Alerts 62
- Admin Contact Info 62
- Password 62
- Email Relay Host 62
- Support Page and Options 63
- Diagnostics 64
- Software Upgrade 65
- Expansion Shelf Licenses 65
- Licenses 66
- Modifying the System Password 71
- Sending a Test Message 75
- Managing Passwords 77
- Adding an Email Relay Host 78
- Editing an Email Relay Host 78
- Creating Containers 80
- Managing Container Operations 83
- Command Line Reference Guide 85
- Editing Container Settings 87
- Deleting Containers 88
- Moving Data Into a Container 89
- System Status Bar 97
- System Information Pane 98
- Monitoring System Alerts 99
- Monitoring System Events 100
- Using the Event Filter 101
- Monitoring System Health 102
- Monitoring System Usage 105
- Setting a Time Range Value 106
- Using Global View 111
- About the Global View Page 113
- Global View Summary 114
- Appliance List 115
- Navigating in Global View 116
- Using the Reconnect Report 118
- Support Information Pane 119
- Diagnostics Page and Options 119
- SSL Page and Options 124
- Generating a CSR 125
- Restore Manager (RM) 126
- Dell DR 127
- DR Series System NVRAM 129
- Interoperability Guide 131
- Best Practices: Rapid NFS 132
- Best Practices: Rapid CIFS 133
- Monitoring Performance 136
- Overview 138
- Guidelines 139
- Adding RDS Devices in NVBU 140
- Understanding RDA with OST 145
- Terminology 146
- Configuring an LSU 147
- Dell DR Series 148
- System Interoperability Guide 148
- servername 153
- Creating Disk Pools From LSUs 154
- Modifying Log Rotation Size 160
- Reference Guide 171
- About the Diagnostics Service 182
- Creating a Cleaner Schedule 185
- Displaying Cleaner Statistics 186
- TCP 801 NFS status daemon 189
- Getting Help 190
- Contacting Dell 191
Produits connexes et manuels pour Matériel informatique Dell PowerVault DR6000
(24 pages)
(74 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.618 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels